User Submitted Posts

User Submitted posts

Projects Wall

Have a look at what others are doing with their Pycom boards and be inspired! All that we ask is that you have permission to share your project before uploading it and that it uses a Pycom product in some way. We know that it’s a bit of a ‘duh’ ask, but we have to do it anyway.

Fridge Sensor

Fridge Sensor

Fridge Sensor Transmitted Over WiFi Background This project was created to keep track of fridges for a brewery and is why it's called a "Fridge Sensor." However, this asset tracker can be modified in order to be able to track any kind of asset. This sensor measures...

Plant Sensor

Plant Sensor

Plant Sensor transmitted over Wifi Background: This tutorial aims to create a plant sensor to be placed inside of a plant pot in order to read temperature, pressure and humidity around the plant as well as measuring the moisture levels inside of the plant pot. We'll...

Sending A Sigfox Message With MicroPython

Sending A Sigfox Message With MicroPython

Introduction This tutorial will get you started with sending your first Sigfox message in MicroPython using the SiPy Dev Kit! It will walk you through registering your device, provisioning it's Device ID and PAC number. Installing the Firmware Upgrade Tool First thing...

LoPy LoRaWAN Nano-Gateway Using MicroPython and TTN

LoPy LoRaWAN Nano-Gateway Using MicroPython and TTN

LoRaWAN Nano-Gateway This example allows to connect a LoPy to a LoRaWAN network such as The Things Network (TTN) or Loriot to be used as a nano-gateway. This specific example uses settings specifically for connecting to TTN within the European 868 MHz region. To set...

Resin OTA Manager for Pycom Devices

Resin OTA Manager for Pycom Devices

Resin OTA Manager for Pycom Devices This repo consists of a Resin image of a Pycom Over the Air (OTA) firmware (FW) and software (SW) Manager. The repo consists of two main components: The library that allows a Pycom module perform updates from the server, along with...

Upload your project with the form below

Please complete the required fields.
Please select your image(s) to upload.

Contact Us

8 + 12 =